Oil Seal Group Excavator Final Drive Seal Floating Oil Seal For PC400, VLV360, EX400
*Oil seal group Excavator final drive seal group
2.Floating seal Application Fields
*Hydraulic cutter*Tunnel excavator
4.Details & Advantage
*Design a reliable.
*Effective packer outside dust, water, dirt and protected within the lubricating oil and grease.
*Low cost, high efficiency.
*Longer service life.
a).Completely clear cavity and seal, remove oil, dirt, grease, metal debris such as residue.
b).Only can remove the seal from the packaging before installation, so that we can prevent damage of grinding surface.
c).Confirm whether the rubber ring close to the metal rings inside of the edge.
d).Installing half seals into the chamber (rubber ring and metal ring), and then check the position of seals, rubber rings must be parallel to the bottom of the cavity.
e).After installed the half seal, use Lint-free cloth to wipe the two metal surfaces, applied in a thin layer on the sealing surface of the film (the internal use of oil), pay attention only to lubricate the seal surface.
f).Put on the other half ,then check whether it is up to specification.